Fun DIY In Melbourne: How To Make Soy Candles In Melbourne
Tags:
soy candles | soy candles made in Melbourne | Soy Candles Melbourne | soy wax candle | wedding decorative candles
Making your very own votive soy candles in Melbourne is a really fun experience. You get the chance of experimenting with different fragrances that you love in Melbourne. They make beautiful gifts for your friends and neighbors and are attractive around your home too. The best part is that they are not complicated and can be easily made in your kitchen.
The Ingredients You Need
The ingredients you need to make your very own votive hand poured soy candles in Australia, Melbourne, are, eight votive molds with wick pins, you will need eight candle wicks. You will need either a pour pot or a double boiler. You can even use a simple saucepan with water at the bottom. You have to use a rubber spatula that should be able to with stand heat. You need a glass candy thermometer, one pound soy votive wax, one ounce of fragrance oil and also a candle dye of any color. For your first attempt, you can try without the dye.
Steps To Make Soy Candles
The first step of making hand poured soy candles in Australia, Melbourne, is to get everything ready. You have to spread a sheet of wax paper on a table or your counter. You have to set up the votive molds with the wick pins. The paper is necessary to protect your table or counter from any spillage. You have to place your pour pot or sauce pan on a scale, preferably digital scale. Once the scale points “zero” you have to start loading up the pot with soy votive wax until the scale shows “one pound”. Prepare a separate pot with water in it, for two inches depth. You must place your pour pot into this. Always keep in mind to use a double boiler set up, because the pour pot with wax that comes in direct contact with the stove is liable to combust. You have to set the stove for medium to low heat. You have to place the thermometer in the wax and set your timer to fifteen minutes.
You can remove the pour pot from the stove once the soy votive wax has melted and reached the temperature of 195-200 degrees F. Once the wax cools to 185 degrees, you have to add the fragrance oil and stir for some time. Then you have to add the dye of your choice and keep stirring. You can skip this step if you are not using a dye. Once the wax cools to 175 degrees, you have to pour them into the votive mold. You have to let them cool in the room temperature in Melbourne. Usually it will take one or two hours, but once they are cool, the soy candles in Melbourne should easily slip out of the metal mold.